CUSTOMER NOTICE: We would like to wish all our customers a very Merry Christmas and to thank you for your support during this difficult year. Please be aware that we will be closing on Friday 18th December until Monday 4th January, and no orders will be processed or delivered during this time. Please feel free to contact the office on 01934 825850 for delivery dates.

Safemark Clear Multi-Prime 5L

£35.00
PRCLEARTC5
+

Safemark Multi-Prime is an effective solvent-based primer for bonding thermoplastic materials and Safemark Line marking products to concrete and worn bituminous surfaces. Its low viscosity facilitates deep penetration into substrates.

Recommended Uses

To improve the adhesion of thermoplastic materials, Safemark MMA and SB Acrylic Line Marking products between concrete, worn asphalt, block paviors or other bituminous surfaces.

Coverage

Up to 60 linear metres @ 100mm width line per litre.

Typical 50 linear metres @ 100 mm width line per litre.

5/6 square metres per litre.

Benefits

Virtually colourless

Superior adhesion enhancement

Ready to use - no mixing required

Fast drying, Touch dry in approx. 10 minutes

Easy to apply

Surface Preparation

Surface must be clean, dry and free from any contamination including dust, dirt oil, grease, laitance and curing agents. Particular attention should be given to ensuring the surface is free from salt, ice and moisture.

Please read data sheets and installation guide carefully prior to application.

Health & Safety Sheet [Download]

Technical Data Sheet [Download]