Safemark Multi-Prime is an effective solvent-based primer
for bonding thermoplastic materials and Safemark Line marking products to
concrete and worn bituminous surfaces. Its low viscosity facilitates deep
penetration into substrates.
Recommended Uses
To improve the adhesion of thermoplastic materials, Safemark
MMA and SB Acrylic Line Marking products between concrete, worn asphalt, block paviors
or other bituminous surfaces.
Coverage
- Up to 60 linear metres @ 100mm width line per litre.
- Typical 50 linear metres @ 100 mm width line per litre.
- 5/6 square metres per litre.
Benefits
- Virtually colourless
- Superior adhesion enhancement
- Ready to use - no mixing required
- Fast drying, Touch dry in approx. 10 minutes
- Easy to apply
- Surface Preparation
Surface must be clean, dry and free from any contamination
including dust, dirt oil, grease, laitance and curing agents. Particular
attention should be given to ensuring the surface is free from salt, ice and
moisture.
Please read data sheets and installation guide carefully prior to application.